Teic store 1343 peach drive phone: 877-6437, Thank you, Call again – Toshiba TEC MA-1100-400 SERIES User Manual
Page 98: 16-83 n0 p 13, 0026 13:55tm
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
NOTES: 1. Programming a dot-print right or left way next to a pre
programmed dot-print position will result in an error.
ex.)
[
I
I
I
If a dot-print has already programmed
1AIBIC j~
in the position shown as
no dot-
jDI>I
e
[~ print can be programmed in the position
IFiGIHI
of D or E. It will be all right to
~| j
\
[~ program dot-printing in the position
of A, B, F, G, or H.
2. To read what has already been programmed with a specific
Character Code, operate:
Mode Lock to SET ,| U|1@7F^^ I Character Code! 1"^ •» [?1-»I AT/TL1 .
Then the character that has programmed with the Character Code
will be printed.
Programming Example
To program the character as in the figure below with Character Code
170 assigned:
1 2 3 4 5 6 7
TEIC STORE
1343 PEACH DRIVE
PHONE: 877-6437
Thank you
Call again
09-16-83 N0
P 13
»170
0026 13:55TM
- 94 -