Toshiba TEC MA-1100-400 SERIES - Manual (Page 84)

PLU TABLE PROGRAMMING OR CHANGING
CONDITION: After a PLU Reset to renew the PLU table^ or any time outside
a sale to program additional PLUs or to change the PLU name
only.
OPERATION: Mode Lock: SET
4l I@7 fo ~ r 1
(or in ) ( 1
PLU Code PLU ►(I Whole Package Quantity
l~99j or 0 for resetting,'
for split-price PLU only
for
another
PLU
for open PLU
lUnit Price! ”
(max. 6 dig.)
for preset PLU
for the next
isequencial PLU
•( fWMl)
for tax status
change in single­
tax area
■( ITXI/M! ) - (iTx27Ml) -
for tax 1 for tax 2
status status
change change
I_ _ _ _ _ _ _ _ _ _ _ I
in dual-tax area
STEP (A): Status Change
K IsM])
for S.I.
status
change
Dept.I—
linked
Depart­
ment
Repeat for the next character.
regular-sized
character
--- i@/F0Rl---
one double-sized
character
I@/F0RI I@/F0R1--
-*| Character Code
(2 or 3 digits;''
see the table
on page 113 •)
for spacing in
of a character
>|AT/TL|
to end the PLU Name
( If any space is left
—-—unprogrammed in the
tail, it will auto­
matically be programmed
as space.)
Entire PLU name
with all double-sized
characters
STEP (B): Name Change
Repeat for other PLUs
(max. 300 PLUs)
NOTES: 1, The " | PLU Code j rPLUl ” entry may be skipped if the PLU Code is
sequencial from the previous PLU' s code. If this PLU code entry
is skipped at the very first PLU, the PLU code will automatically
be programmed as PLU No.l.
2. As for the tax status change and S.I. status change, refer to
the description in NOTE 6 (page 78 ) which is attached to the
"DEPARTMENT NAME AND STATUS PROGRAMMING OR CHANGING" operation.
Each PLU's tax and S.I. status is programmed independently from
that of the linked department. However, the positive/negative
status of a PLU is ruled by that of its linked department.
- 80 -