Toshiba TEC MA-1100-400 SERIES User Manual
Page 111
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONDITION:
Any time outside a sale
OPERATION:
STORE NAME/MESSAGE AND COMMERCIAL MESSAGE PROGRAMMING
Mode Lock: MGR
SET
■»I Line No. I i ST I —
(1 ~ 3)
or
(1 ~ 7)
Repeat for the next character.
regular-sized
character
----i @/FOR I-
one double-sized
character
—» IW
for
I [@/
for
I—
Entire line with all
double-sized characters
->| Character Code
(2 or 3 digits;
see the table
on page 113.)
for spacing instead
of a character
*
[ST] —»[AT/fg
to end each line,
(if any space is
left unprogram-
in the line end,
it will automati
cally be program
med as space.)
NOTES: 1. The
\~W\
key after the Character Code entry may be replaced by
the I^/CIDI or Ij^/NS 1 key.
2. For one line,
a maximum of 20
regular-sized characters
or 10
double-sized characters may be entered. A combination of both
types is also available.
3. If "Store Name/Message FIXED" is selected in the system option,
no data can be programmed for the store name/message (and the
store name stamp will be printed instead); therefore, enter 1
through 3 for each line of commercial message.
If "Store Name/Message PROGRAMMABLE" is selected in the system
option, enter
1 through 4 for
the store name/message
and 5
through 7 for the commercial message.
4. If no commercial message is required on the receipt, program
all space for all the three lines. Then no message will be
printed an no extra line space will be fed. If any one of the
three lines is ever programmed, the two other lines will remain
programmed with space and will turn out to be extra space lines
to be fed on the receipt.
5. The 4-liue space assigned for the store name/message will be
either printed
(if programmed) or fed (if all space is program
med), but will
never be shortened when a receipt is issued,
as
long as "Store Name/Message PROGRAMMABLE" status is selected in
the system option.
- 107