FingerTec Q2 - Manual (Page 47)

46
RX+
RX-
Q2 Reader C2 Controller RS232/RS485 RS232 cable PC
Data converter
Note
When the RS485
function is enabled,
the Ethernet will be
disabled.
Comm Opt u
4 RS232 Yes
4RS485 Yes
RX+
RX-
Q2 Reader C2 Controller RS232/RS485 RS232 cable PC
Data converter
RS485 Network Connection
1. Setup of RS485
Access Menu, select “Options” > “Comm. Opt”
> “RS485”, select “Yes” to enable RS485
function.
2. Turn off the reader.
3. Plug the RS485 cable extender to the RS232/485 port on the Power Controller,
and another end of the cable to the RS232/485 network.
4. Connect computer to the RS485 network with the RS232/485 converter.
5. Turn the power on.