Verification with rfid card – FingerTec i-Kiosk 100 Plus Manual User Manual
Page 35
Advertising
35
1
2
3
VERIFICATION WITH
RFID CARD
RFID card user can do verification at the reader by the
following combinations:
To enable this operation, configure option Card Only
in Advance Option to Yes.
Wave RFID card at the induction area.
The reader will read the RFID card to verify it.
The RFID card number and User ID will be displayed on screen,
If verification failed, the screen will show RFID card number and
and reader will prompt, “Thank you”.
message “Not enrolled”.
Advertising