FingerTec i-Kiosk 100 Manual - Manual (Page 18)

18 CONTENTS
Display Settings
Customize your i-Kiosk 100 display to your liking and requirements.
SYSTEM LANGUAGE
The i-Kiosk 100 offers various languages to match your local requirements. A maxi-
mum of 3 language packs are available in the i-Kiosk 100 and it is set according to
your request during purchase. Default language is English. Press Menu > System icon
> Misc. Set > Language > Choose your language > Save
PICTURE DELAY
Picture delay is an idle period before the screen displays your loaded advertisement. It
ranges from 1-99 seconds. Menu > System icon > Display > Picture Delay > Determine
your time > Save
SLEEP TIME
Sleep time is a period before the i-Kiosk 100 goes to sleep mode. This setting is avail-
able as power saving feature of the terminal. The time range is from 0-999 seconds.
Menu > System icon > Misc. Settings > Sleep Time > Determine your time > Save
FINGERPRINT SETTINGS
Configure settings for fingerprint enrollment and verification to achieve optimum ef-
fectiveness.
SETTING THRESHOLD
Threshold is a level of fingerprint scanner’s sensitivity. Threshold determines how
many percent of minutiae points on a fingerprint template will be read by the system.
The higher the threshold level, more points are being read, more restricted the sys-
tem. Configure the threshold for 1:1 and 1:N methods.
For 1:1, the range is from 0-50 and the recommended value is 35.
For 1:N, the range is from 0-50 and the recommended value is 45.
Menu > System icon > System settings > 1:1 Threshold or 1:N Threshold > Determine
the Level > Save
NUMBER OF TRIES
You can set the limit to the number of tries for 1:1 verification. The range is from 1-9.
If a user’s number of try exceeds the limit, the terminal could trigger the alarm system
to alert security that somebody is meddling with the terminal. Menu > System icon >
Display> 1:1 Match Retry Times > Determine the Value > Save