FingerTec Keylock 7700 - Manual (Page 14)

14
CONTENTS
5 • Managing USB Flash Disk
USING USB TO DOWNLOAD/UPLOAD DATA
The USB flash disk is used to download and upload data from Keylock 7700. This is the
only way of communication between Keylock 7700 and the computer. To determine
the compatibility of USB flash disks, please refer to the following link:
fingertec.com/
newsletter/HL_74.html .
Insert the USB flash disk into the USB port located at the back of the Keylock 7700 ter-
minal. Please refer to page XX. Once the USB flash disk has been inserted into the USB
port, hold down the
OK button to proceed to the Main Menu > Select USB Mgmt .
USING USB TO DOWNLOAD LOGS
The transaction logs stored in Keylock 7700 can be downloaded into the Software soft-
ware via the USB flash disk. Hold down the
OK button to proceed to the Main Menu >
Select USB Mgmt > D/Load Log .
USING USB TO DOWNLOAD USERS
To download users from Keylock 7700 to the Software software: Hold down the OK
button to proceed to the Main Menu > Select USB Mgmt > D/Load User .
USING USB TO UPLOAD USERS
To upload users from the software to Keylock 7700: Hold down the OK button to pro-
ceed to the Main Menu > Select USB Mgmt > U/Load User .
USING USB TO UPDATE FIRMWARE
To upload firmware to Keylock 7700: Hold down the OK button to proceed to the Main
Menu > Select USB Mgmt > Update Firmware .