FingerTec Keylock 7700 - Manual (Page 8)

8
CONTENTS
Center point of a fingerprint
3 • Main Menu – Managing Users
ENROLLING USER
Keylock 7700 can contain up to 500 fingerprints, 500 passwords and 500 RFID cards.
FINGERPRINT ENROLLMENT
It is recommended to enroll two fingerprint templates for each user ID. One fingerprint
template will be used as default and another one as backup. It is necessary to check
the quality of the fingerprint before performing the fingerprint enrollment. The center
point of the fingerprint has to be placed in the middle of the fingerprint scanner to
ensure an optimal and successful enrollment. Please ensure that the hands are not wet
or too dry prior to enrollment.
To enroll fingerprint: Hold down the OK button to proceed to the Main Menu > Select User
Manage > Enroll User > Enroll FP (Follow the instructions given onscreen) > OK (Save) .
CARD ENROLLMENT
All Keylock 7700 devices are equipped with the RFID module, which enables the RFID
card reading function. However, MiFare and HID card systems are available upon re-
quest.
To enroll RFID card: To enroll RFID card, hold down the OK button to proceed to the Main
Menu > Select User Manage > Reg RFID and follow the instructions given onscreen to com-
plete the enrollment process.
To enroll MiFare card: The MiFare card system is available upon request. The enrollment
menu for the MiFare card system is different compared to the RFID card system. Hold down
the
OK button to proceed to the Main Menu > Select User Manage > FPCard Mgmt .
CREATE PIN CARD
This function is to create an identification card without storing any fingerprint tem-
plates into the card. Hold down the
OK button to proceed to the Main Menu > Select
User Manage > FPCard Mgmt > Create PINcard (Follow the instructions onscreen).