FingerTec Face ID 4d - Manual (Page 9)

9
Back Plate
 feet / 1.2 meter
(recommended)
s u p p o r t @ f i n g e r t e c . c o m
This is only available
for Face ID 4d
DC12V 3A
Power Supply
TCP/IP Port
TCP/IP
POWER SUPPLY (A)
DC12V A
Power Supply
GND
+12V
Alarm output
Door Lock
System
CONNECTOR PINS
 • CONNECTION – SYNCING TERMINALS
Installation
FingerTec terminals offer several connections for power and communications. To in-
stall the Face ID d, follow the instructions below.
Mount On Wall
Attach the back plate
on to the wall securely
and attach the ter-
minal on to the back
plate when mounting
it on the wall.
Communication Diagrams
Connection points for power and communication are available at the back of the
terminal. Refer to the following diagrams for the correct installations.