GTCO 2500 Series - Users Guide 3/3 - Manual (Page 18)

2500 Series 18
Where:
(b1) = A, for Port A, B for Port B or no entry.
b2 = baud rate code number
0 = 19200
1 = 9600
2 = 4800
3 = 2400
4 = 1200
5 = 600
6 = 300
7 = RESERVED
b3 = parity code letter
E = Even
M = Mark
N = None
O = Odd
S = Space
b4 = 7 or 8; the number of data bits.
b5 = 1 or 2; the number of stop bits.
(b6) = 1 or 0; to enable or disable hardware handshaking.
1 enables
0 disables
If b6 is not specified, the handshaking is not changed.
EXAMPLE:
To set Port A (although the tablet does not require that a port be specified) for 1200 baud,
even parity, 7 data bits, 2 stop bits and no hardware handshaking, enter:
Host = ESC % C A 4 E 7 2 0 CR
Menu = [COM] [A] [4] [E] [7] [2] [0] [CR]