GTCO 2500 Series - Users Guide 3/3 User Manual
Page 30
2500 Series 30
16-Button Cursor Command Summary
The 16-button cursor has a limited subset of the tablet commands. The FF serves as the
command prefix. The 4-button cursor may not be used for commands.
To disable the cursor commands, either issue the command below or set Switch 5 in Bank
5 to a 0.
CURSOR CODE
COMMAND DESCRIPTION
FF 0 E
FF 1 E
FF 2 E
FF 3 E
FF 4 E
FF 5 E
FF 6 E
FF 7 n E
FF 8 n E
FF 9 n E
FF A [0/1] E
FF B [0/1] E
FF E [0/1] E
Disable Cursor Commands
SET OPERATING MODE
Halt
Increment Track
Point
Run
Track
Line
SET DATA RATE
n may be from 1 PPS to 125 PPS
INCREMENT VALUE
Set X Increment Value
Set Y Increment Value
SET OUTPUT PORTS
Enable/Disable or Toggle Port A
Enable/Disable or Toggle Port B
Enable/Disable or Toggle Echo