GTCO 2500 Series - Users Guide 3/3 - Manual (Page 31)

2500 Series 31
Host and Menu 9100 Series Compatible Command Summary
All host commands must be preceded by a command prefix and followed by CR. The
command prefix from the host is ESC % unless changed by the user. The system function
blocks of the menu serve as the command prefix for the menu. The tinted [CR] block on
the menu terminates the command.
LEGEND
a
b1…bn
CR
<DPOINT>
[]
…
[0/1]
n An ASCII character or characters which invokes a command
ASCII characters which are selected by the user. Limits on the
characters are explained briefly in the description column of the
table and fully in the commands section.
ASCII carriage return or the CR block of the menu.
A point on the active area which is digitized to indicate where you
wish to locate a function. The DPOINT is entered AFTER the CR.
Menu block to pick.
The information may be repeated as needed.
0 will DISABLE the function; 1 will ENABLE it. Entering neither 0 nor 1
will toggle the function when CR is entered.
A numeric variable.