GTCO Roll-Up II - Users Guide - Manual (Page 44)

Roll-Up II 44
Summagraphics Emulation Commands
Roll-Up II recognizes a subset of the Summagraphics UIOF command set. Space does not
permit a detailed description of Summagraphics commands. However, most of the
commands in this subset have equivalent Roll-Up II commands. For further information
about the operation of those commands, please refer to the Roll-Up II command or
function description in the GTCO CalComp by Turning Technologies Roll-Up II Command
Summary.
NOTE: Summagraphics commands do not require a terminator.