Juniper Systems Mesa User Guide - Manual (Page 60)

60
Mesa Rugged Notepad Owner’s Manual
Navigation Options
Select the Options soft key to set, clear, or mark a waypoint, set
up a breadcrumb trail, change the units of measurement, or turn
the power on or off.
„
Set: Take the coordinates in the “Change” boxes and set
these as the new waypoint.
„
Clear: Clear the waypoint (goes back to the blue flag).
„
Mark: Take the current GPS coordinate and set this as the
new waypoint.
„
Units: Displays units in either feet/miles for U.S. or meters/
km for metric.
„
Nav Mode:
Bearing – The arrow icon and angle displayed are
referenced off of North. Position the top of the device
toward North and the arrow will point in the direction to
travel to get to the waypoint. When in this mode an ‘N’ is
displayed before the angle.
Heading – The arrow icon and angle displayed show the
direction to travel to get to the waypoint relative to the