Juniper Systems Mesa User Guide - Manual (Page 73)

Protecting the Touchscreen
Protect the touchscreen from impact, pressure, or abrasive
substances that could damage it. To further protect the
touchscreen, apply one of the screen protectors that came with
the Mesa. To apply a screen protector, follow the directions that
come with it in the package.
CAUTION: Be sure to replace the screen protector as often as
the screen protector instructions recommend.
Cleaning the Mesa
Touchscreen
1. Disable the touchscreen by pressing and holding the
touchscreen disable/enable button or press the power
button briefly to suspend the device.
2. Remove the screen protector if you want to clean
underneath it.
3. Apply warm water or a mild cleaning solution to a
microfiber cloth and gently wipe off the touchscreen.
CAUTION: Do not use tissues, paper towels, soft bristle
brushes, or harsh cleaning solutions on the touchscreen.
4. Rinse the touchscreen with water and dry it with a
microfiber cloth.
5. Apply a screen protector. (To clean a screen protector,
follow the instructions provided with the package.)
6. Enable the touchscreen by pressing the touchscreen
disable/enable button or press the power button to resume
the device.
Case, Bumpers and Connector Module
Make sure the battery doors are securely installed. Use warm
water, a mild cleaning solution, and a soft bristle brush to clean
the case, bumpers and connector module.
!
!
Ch 8 Storage, Maintenance and Recycling
73