Speakerphone commands, Vsp - speakerphone on/off, Syntax – Longshine LCS-8056C2 User Manual
Page 154: Defined values, Reporting current or selected values, Reporting supported range of parameter values, Result codes
Advertising
Commands for Host-Processed Modems Reference Manual
5-22
Conexant
100498E
5.2.3
Speakerphone Commands
+VSP - Speakerphone ON/OFF
This command turns the speakerphone ON or OFF
Syntax
+VSP=<mode>
Defined Values
<mode>
Decimal number corresponding to the selected option.
0
The speakerphone function is OFF.
1
The speakerphone function is ON.
Reporting Current or Selected Values
Command: +VSP?
Response: +VSP:
<mode>
Example:
+VSP: 0
For the default setting.
Reporting Supported Range of Parameter Values
Command: +VSP=?
Response: +VSP:
(<mode>
range)
Example: +VSP:
(0,1)
Result Codes
OK
<mode> = 0 or 1.
ERROR
Otherwise, or if not in Voice Mode.
Advertising