Longshine LCS-8056C2 - Manual (Page 27)

Commands for Host-Processed Modems Reference Manual
100498E Conexant 3-5
\N - Operating Mode
This command controls the preferred error correcting mode to be negotiated in a subsequent
data connection.
Syntax
\N<mode>
Defined Values
<mode> Decimal number which corresponds to the selected mode.
0 Selects normal speed buffered mode (disables error-
correction mode) and forces &Q6 (selects
asynchronous operation in normal mode.)
1 Same as \N0.
2 Selects reliable (error-correction) mode and forces
&Q5 (the modem will try to negotiate an error
corrected link). The modem will first attempt a
LAPM connection and then an MNP connection.
Failure to make a reliable connection results in the
modem hanging up.
3 Selects auto reliable mode and forces &Q5 (the
modem will try to negotiate an error corrected link).
This operates the same as \N2 except failure to make
a reliable connection results in the modem falling
back to the speed buffered normal mode.
4 Selects LAPM error-correction mode and forces &Q5
(the modem will try to negotiate an error corrected
link). Failure to make an LAPM error-correction
connection results in the modem hanging up.
5 Selects MNP error-correction mode and forces &Q5
(the modem will try to negotiate an error corrected
link). Failure to make an MNP error-correction
connection results in the modem hanging up.
Result Codes
OK <mode> = 0 to 5.
ERROR Otherwise.