Longshine LCS-8056C2 - Manual (Page 93)

Commands for Host-Processed Modems Reference Manual
100498E Conexant 3-71
+PQC - V.92 Phase 1 and Phase 2 Control
This command controls the global enabling or disabling of the V.92 shortened Phase 1 and
Phase 2 startup procedures. This command is used in conjunction with the +PSS command.
Syntax
+PQC=<value>
Defined Values
<value> Decimal number corresponding to the selected setting.
0 Enable Short Phase 1 and Short Phase 2. (Default.)
1 Enable Short Phase 1 only.
2 Not supported.
3 Disable Short Phase 1 and Short Phase 2.
Result Codes
OK 0, 1, or 3 in V.92 Mode (+MS=V.92)
ERROR Otherwise
Reporting Selected Values
Command: +PQC?
Response: +PQC: <value>
Example: +PQC: 0
Reporting Supported Range of Parameter Values
Command: +PQC=?
Response: +PQC: (<value> range)
Example: +PQC: (0,1,3)