Longshine LCS-8056C2 - Manual (Page 87)

Commands for Host-Processed Modems Reference Manual
100498E Conexant 3-65
%TT6xy xy correspond to the desired V.92 bit rate (24000, 25333, 26667,
28000, 29333, 30667, 32000, 33333, 34667, 36000, 37333, 38667,
40000, 41333, 42667, 44000, 45333, 46667, or 48000):
00 24000
01 25333
02 26667
03 28000
04 29333
05 30667
06 32000
07 33333
08 34667
09 36000
0A 37333
0B 38667
0C 40000
0D 41333
0E 42667
0F 44000
10 45333
11 46667
12 48000
13-FF Reserved
3.2.10 V.92 +P and –Q Commands
This section describes the +P (PCM DCE) and –Q commands and parameters used to control
the V.92 Mode operation.
+PCW - Call Waiting Enable
This command controls the operation of the modem in the presence of call waiting.
Syntax
+PCW=<value>
Defined Values
<value> Decimal number corresponding to the selected operation.
0 Request modem-on-hold if enabled by +PMH and
collect caller ID information if enabled by +VRID.
Toggle V.24 circuit 125. (Default.)
1 Hang-up.