I - request identification information, Syntax, Defined values – Longshine LCS-8056C2 User Manual
Page 29
Commands for Host-Processed Modems Reference Manual
100498E
Conexant
3-7
I - Request Identification Information
This command causes the modem to report one or more lines of product information text, as
selected by the <value> subparameter, followed by a final result code.
Syntax
I[<value>]
Defined Values
<value>
Decimal number corresponding to the selected information.
0
Reports product code, e.g.:
ATI0
56000
OK
1
Reports the least significant byte of the stored
checksum in decimal (see firmware release notes).
Reports 255 if the prestored checksum value is FFh,
e.g.,
ATI1
255
OK
2 Reports
OK,
e.g.:
ATI2
OK
OK
3
Reports identification codes, e.g.:
ATI3
SoftK56V_B2.1_V7.04.05
OK
4
Reports product description from the .INF file (the
response is customizable by customizing the INF
file), e.g.:
ATI4
SoftK56 Data Fax
OK
5
Reports Country Code parameter (in decimal), e.g.:
ATI5
181
OK