TeeJet Legacy 6000 Manual - Manual (Page 117)

Chapter 5 - System tools 112
4. Press the Update Files softkey.
5. Select “Object Names” as the update file and press the Enter button. this
will place the names file, located in the /Sys/Names folder into system
memory.
Speedometer
test Speed can be activated and set from the Speedometer page. Refer to ChaP-
teR 4 - teSt SPeed for additional information.
NOTE: If test speed is activated, it will override the speed input when trying to
apply during application.
Figure 5-2: Speedometer Page
Table 5-3: Speedometer Settings
softkey description
information. displays general module information including serial number and software
version.
Module Flags. System diagnostic tool that identifies the active functions.
Settings. Displays current configurations.
messages. displays messages currently being sent by the module
error Log. displays the error log from this module.
Update Files
softkey
Enter button