TeeJet Legacy 6000 Manual - Manual (Page 123)

Chapter 5 - System tools 118
Table 5-5: Channel Softkeys
softkey description
information. displays module serial numbers and software version.
Module Flag 1. System diagnostic tool that identifies the active functions on the DCM.
Module Flag 2. System diagnostic tool that identifies the active functions on the DCM.
Settings. Displays module’s current configuration.
messages. displays the messages currently being sent by the module.
error Log. displays the error log from the module.
CaRd maNageR
Card manager allows the operator to manage the contents of the PC Card. the
PC card must be inserted into the console prior to using Card manager. Card
manager is accessed by selecting the Card Manager softkey on the System Tools
page. the PC Card must be set to “yeS” in Console Setup for Card manager to
be accessed.
Figure 5-12: Card Manager
Card Manager
softkey