TeeJet Legacy 6000 Manual - Manual (Page 143)

Chapter 7 - eXt 138
implement Setup Completion
once the necessary entries have been made, the Finish page will be displayed.
Select the Review Settings softkey to review the selected configurations. Select the
Forward Arrow to save the configuration and return to the main ARM launcher.
Figure 7-5: Implement Setup Finish Page
CoNtRoLLeR SetuP
the type of external rate controller to be connected to the Legacy 6000 console
is selected during Controller Setup. Select “System Setup (F1)” from the Main
Launcher page to launch the System Setup page. From the System Setup page
select “Controller Setup”.
Figure 7-6: Controller Setup Page
Review Settings
softkey (F2)
Forward Arrow
softkey (F6)