TeeJet Legacy 6000 Manual - Manual (Page 6)

Legacy 6000
98-05053 R2
1
ChaPteR 1 - iNtRoduCtioN
the Legacy 6000 system allows the control of multiple products plus gPS map-
ping, guidance, assisted steering, automated Boom Section Control, and data col-
lection in a single console using CaN bus technology. Replacing multiple consoles
in the cab with one robust system, teeJet technologies’ Legacy 6000 sets a new
standard for control systems of the future.
the Legacy 6000 runs Fieldware software in a windows Ce environment, an ex-
tremely dependable and stable operating system. operation is intuitive with on-
screen menu choices and prompts. an on-board help menu is built in.
SyStem FeatuReS
System features include:
Six product control •
Five guidance modes (ignore headland, Curved [headland], Straight-Line •
[Parallel], Curved a-B, and Center Pivot)
Single console in the cab with a single cable connection to the console
•
Simplified operation of product control and GPS record keeping •
auto boom section shutoff using Switch Function module (SFm) or Swath •
manager 5
FieldPilot module for assisted steering on straight, circle pivot, and curved
•
paths
works with teeJet technologies’ Swath XL Lightbar
•
Comes fully loaded with “Fieldware for the Legacy 6000” software •
Precise control of liquid, injection, and dry products on common delivery •
systems
Flow or pressure-based liquid control with multiple sensor inputs for each
•
product
handles up to 20 individual boom sections and 4 swaths
•
up to 5 application rates per product can be preset and accessed on the •
go
Supports granular application control using 2 rate sensors per product
•
Compatible with most sensors, valves, and d.C. driven motors •
operates bidirectional or Pwm valves •
operator selectable gain settings for control valves •