TeeJet Legacy 6000 Manual - Manual (Page 118)

Legacy 6000
98-05053 R2
113
Swath manager Led Brightness
the Led brightness is adjusted by selecting the Adjust LEDs softkey on the De-
vice Manager page with “Swath manager” selected. options range from 1 (low)
through 8 (high).
Figure 5-3: Swath Manager LED Brightness
diagnostic information regarding the system’s CaN switchboxes, Switch Function
module or Swath manager 5, and software versions is also available by selecting
the Information softkey. the Update Flash softkey can be used to update firmware
in the CaN modules. do not use this function unless directed to do so by your tee-
Jet technologies supplier or teeJet technologies Customer Service personnel.
Figure 5-4: Module Information
Adjust LEDs
softkey
Information
softkey
Update Flash
softkey (F2)