TeeJet Legacy 6000 Manual - Manual (Page 94)

Legacy 6000
98-05053 R2
89
established. to establish mark a, press the Mark A softkey. once pressed, the
mark a softkey will automatically change to the Mark B softkey. the lightbar will
display “maRk B”.
mark B
to establish Point B, press the Mark B softkey and Point B will be displayed on the
Map page. the initial swath baseline has been established. the lightbar will begin
displaying the user-defined messages selected during the setup process. A new
a-B line can be created by pressing the New Guideline softkey and repeating the
process. Typically, Points A and B are marked at opposite ends of the field.
Figure 4-15: Established A-B Line
When navigating a turn at the end of the field, the lightbar will display the distance
to the next swath.
Figure 4-16: Example of Turn
Mark B softkey
New Guideline
softkey