TeeJet Legacy 6000 Manual - Manual (Page 145)

Chapter 7 - eXt 140
PRoduCt SetuP oPeRatioN
Product information (product name and prescription map file name information) is
entered during Product Setup. to run Product Setup, select the Product Setup tab
on the ARM Launcher.
Figure 7-7: Product Setup
Table 7-5: Product Setup Descriptions
settings description
Prescription If Variable Rate product application is to occur, select the prescription file (.ARM) that
contains the prescription information for the specific product. The (.ARM) file can be
on the root of the PC Card or in the Job folder. the PC Card must be inserted into the
Legacy 6000 console. if variable rate application is not to be performed, leave this
setting at “None”.
Layer Some prescription files (.ARM) can contain several products in a single file. A single
product is associated to a single layer. In a multiple product prescription file, it is nec-
essary to set which layer is associated with which product. if there is only one product
layer in the (.ARM) file, this setup item is automatically set to Layer 1 and this page is
skipped during the Product Setup wizard process.
Product Product Setup contains a product database with approximately 4000 product names
and their associated ePa numbers. a product name can be selected from this setup
page. if a prescription map (.aRm) is being used, product setup automatically extracts
the product name from the (.aRm) product layer. Select the <From map> setting on
the product page.
Product Setup
tab