VACUUBRAND MZ 2C EX +IK+EK - Manual (Page 2)

page 2 of 75
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. manual-no.: 999128 / 29/04/2014
Dear customer,
Your VACUUBRAND diaphragm pump shall support you at your work for a long time without any trouble
and with full load output. Thanks to our large practical experience we attained much information how you
could add to an efficient application and to personal safety. Please read these instructions for use prior
to the initial start-up of your pump.
VACUUBRAND diaphragm pumps are the result of many years of experience in construction and practi-
cal operation of these pumps combined with the latest results in material and manufacturing technol-
ogy.
Our quality maxim is the ”zero fault principle”:
Every delivered diaphragm pump is tested extensively including an endurance run of 14 hours. Due to
this endurance run, also faults, which occur rarely, are reported an can be corrected. Every single dia-
phragm pump is tested on achievement of the specification after the endurance run.
Every VACUUBRAND pump leaving our factory achieves the specification. We feel obliged to
this high quality standard.
We are aware that the vacuum pump should not draw a part of the real work and we hope to contribute
with our products to an effective and trouble-free realisation of your work.
Yours
VACUUBRAND GMBH + CO KG
After sales service: Contact your local dealer or call +49 9342 808-5500.
Attention: This manual is not available in all languages of the
EU. The user must not operate the device if he does not under-
stand this manual. In this case a technically correct translation
of the complete manual has to be available. The manual must
be completely read and understood before operation of the de-
vice and all required measures must be applied.
Trademark index:
VACUU•LAN ® (US-Reg.No 3,704,401), VACUU•BUS ® , VACUU•CONTROL TM , chemistry-HYBRID TM ,
Peltronic ® , TURBO•MODE TM , VARIO ® (US-Reg.No 3,833,788), VARIO-SP TM , VACUUBRAND ® (US-
Reg.No 3,733,388) and also the shown company logos are trademarks of VACUUBRAND GMBH + CO
KG in Germany and/or other countries.