VACUUBRAND MZ 2C EX +IK+EK - Manual (Page 34)

page 34 of 75
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. manual-no.: 999128 / 29/04/2014
➨ Unscrew the housing plate from the pump.
➨ Position the pump on the motor.
Unscrew the locking plate at the inert gas connection and
remove hose.
➨ Use open-ended wrench to unscrew the inert gas fitting at
the housing cover.
Version 1
Tools required (metric):
- Phillips screw driver size 2
- Open-ended wrench size 10/15/17
- Hex key size 5
- Face wrench with torque indicator
(fig. VACUUBRAND face wrench cat. no.: 637580)
Cleaning and inspecting the pump heads
➨ Unscrew the union nut at the elbow fitting of the pump
head and remove hose.
☞ Turn the fittings as little as possible and do not remove the
fittings from the pump head.
Through reassembly a leak may result.