Removing the camera cluster, Removing the left door, Removing a display shelf – Cisco 3200 User Manual
Page 216
12-8
Cisco TelePresence System 3200
OL-14521-01
Chapter 12 Field-Replaceable Unit Guide
Replacing a Plasma Display—Part Number CTS-DISP-65-GEN4=
Step 4
Loosen the half-turn bolts on either side of the left Speaker board. Slip the Speaker board over the
half-turn bolts and remove it from the work area.
Step 5
If you are replacing the center or right Plasma display, remove the center speaker board by repeating
and
.
Step 6
If you are replacing the center Plasma display, proceed to the next section,
.
Step 7
If you are replacing the right Plasma display, remove the right speaker board by repeating
and
.
Step 8
If you are replacing the right Plasma display, skip to the
“Removing the Left Door” section on page 12-8
Step 9
When you complete the procedure, power on the system by completing the steps in the
the System” section on page 12-4
.
Removing the Camera Cluster
If you are replacing the center Plasma display, you must remove the camera cluster. Refer to the previous
section,
Removing and Replacing the Camera Cluster
for this procedure.
Removing the Left Door
The left tabletop door section must be removed to allow room to move the Plasma displays in and out of
the work area.
Note
Make sure to retain all screws, connectors, and other parts during the disassembly.
Step 1
Remove the safety straps from the underside of the left tabletop section.
Step 2
Unscrew one side of the hinges connecting the left tabletop wing section to the left Table segment.
Step 3
Remove the left tabletop wing section and set it aside.
Removing a Display Shelf
Note
Make sure to retain all screws, connectors, and other parts during the disassembly.
Step 1
Unscrew the left Accessory cabinet from the left Accessory cabinet attachment bracket. Remove the
Accessory cabinet from the work area.
Step 2
From the underside of the left Display shelf, unscrew one side of each metal plate connector.
Step 3
Loosen each draw bolt.
Step 4
Unscrew the left Display shelf from the two Display Shelf support brackets.