Straight stitching, Stitch width selector, Needle position selector – SINGER 5805 User Manual

Page 36: Stitch length selector, Straight stitching stitch width selector

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Straight stitching

Stitch width selector

Before you move the selectors to set your
machine for straight stitching, turn the hand

wheel toward you until needle is at its highest

point.

Straight stitching can be performed with

pattern selector in any position; stitch width

lever must be set at ( j ) only.

Needle position

selector

Needle Position Selector positions the needle
In left ( ^ ), center ( I ) or right ( ^ )
needle positions.

t

i

f

i

1

I

3

Stitch length selector

To adjust the length of your stitches, turn the
dial so that desired stitch length is positioned

under ( • ) symbol.

• To shorten stitch length, turn dial toward a

lower number.

• To lengthen stitch length, turn dial toward a

higher number.

0—5

1

34

Advertising
This manual is related to the following products: