SINGER W3851 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
First of all, loosen the lock screws (B) and set the stopper C; at desired width position respec
tively. Tighten the lock screws (B) setting the zigzag width stopper C' at the number desired.
Thus, a running zigzag stitching is made.
The lock screws move the width stoppers iC) right and left at the same time.
Set the width stoppers C; at the number graduated on the plate. Ihe numbers indicate the wndth
of
zigzag
stitches
in MILLIMETERS when
the
Zigzag width
lever ;A' set
to
"4”,
the
width of
Zigzag stitches become the largest and when the lever A' is set to O”, to extreme left, the
stitches will he straight as in an ordinary manner.