Cording – SINGER W3851 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Q U I L T I N G
Set machine as for sewing without Automatic Mechanism.
at 0 position.
any desired length.
normal.
Zigzag Stitch Hinged Foot & Quilting
Zigzag stitch dial
Stitch length dial
Upper tension :
Presser foot:
.‘\ttachment.
First of all, attach adjustable quilting stitchguide to presser foot bar,
as shown. Place fabric under presser foot and line it up under
needle on line to be stitched. Move curved guide bar to right
as far as necessary to mark desired line of parallel stitching.
Stitch first line. Move material to right until curved guide bar
is directly over the first stitched line. Needle will then be directly
over point where second line of stitching will be made.
C O R D I N G
Remove zigzag stitch hinged fool and attach cording foot
to presser bar. Insert cord into the hole in the base of
cording foot, then pull it, from front to back, through the
hole and guide it afterwards underneath the presser foot.
-
30
^