SINGER W3851 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Run machine at medium speed, making about five to six stitches. Bring zigzag stitch dial to ex
treme left, making a few straight stitches in the same hole.
(Four-Hole Hutton with Parallel Stitching)
Machine Setting and Procedure are the same as for sewing on Button m this part. .After stitching
between first two holes of button, lift button sewing foot slightly and move fabric underneath foot,
to line up remaining two holes with needle, then stitch between second pair of holes.
(Four-Hole liutton with Cross Stitching)
Machine setting and procedure are the same as for sewing on button mentioned above. After
stitching between first two holes of button, lift button sewing foot slightly, then turn fabric at a
right angle so that remaining two holes are in proper position under the needle. Proceed to stitch
lietween remaining two holes then bring the zigzag stitch dial to the extreme left, making a few
straight stitches through the same hole.