SINGER 631 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO RliMOVn AND KI-PI-ACK DliTACHAni.E CLOTH PLATE
To dctadi cloth plate from machine, press button on machine bed and withdraw plate.
Replace cloth plate in same manner, locating two pins in plate with corre.si)ondincj holes in rnatiiinc
bed. Push cloth plate to tight until it snaps in locked position.
See pages 88 to 93 for applications of c>dinder bod feature.
NEEDLE AND THREAD SELECTION
The selection of thread should be based on the fabric to be stitched. The thread should blend with
the fabric in colour, fibre and size.
Silk and wool fabrics should be stitched with silk thread; cotton fabrics should be stitched with cotton
or cotton inorceriscd thread, etc. The thread must be of a size that will imbed itself into the texture of the
fabric. Thread that is too heavy for the fabric will remain on the surface and become weakened by fric
tion and abrasion.
The selection of the needle .should be basen on both the fabric and thread being used. The eye of the
needle must be large enough for the thread to pass freely through it. The blade of the needle must be fine
enough not to mar the fabric with too large a puncture, yet heavy enough to pierce the fabric v/ithout
binding or deflecting.
You will obtain best stitching results from your Sewing Machine if it is fitted with a SINGER* Needle.