SINGER 631 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
REMOVE THE BOBBIN
Open slide plate and remove bobbin.
13
THREADING THE BOBBIN CASE
. . .
\
Hold bobbin so that thread biads off in direction shown. Place bobbin in case. Guide thread into slot
and under spriny.
,
.
Draw thread into notch at end of s))riny, pulling off about 3 inches of thread across the bobbin.
Closer sHd(; platci allowing thread to enter notch.
M
Advertising