Cleaning and oiling the shuttle, Cleaning and oiling shuttle – SINGER W1762 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
25
CLEANING AND OILING THE SHUTTLE
(See Figs. 39 and 40)
The stitch forming mechanism occasionally becomes clogged with loose threads and lint.
This will interfere with the efficient operation of the machine. Cleaning and removal of the
lint will safeguard the performance. To remove the shuttle assembly, proceed as follows.
1. Turn the balance wheel until the needle reaches its highest position. Tilt head back on
its hinges.
2. Remove bobbin case ( A ) , Fig. 40.
3. Turn the two shuttle race cover clamps (B) outward and remove the shuttle race cover
(C) and shuttle body ( D ) .
A
A- ‘ffiM
4
• '
4
I Fig. 39
Fig. 40
Advertising