The adjustable cording – SINGER W1762 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE ADJUSTABLE CORDING
This attachment is used to make and
insert covered cording, and to sew in
zippers. Loosen thumb screw to slide
foot to either right or left of needle.
CORDING. Fold bias strip of fabric
over cord. Loosen thumb screw and set
foot so needle is centered in needle
To sew covered cord to material,
reset adjustable foot so needle stitches
closer to cord, and on edge of base
SEWING IN A ZIPPER
Loosen thumb screw and slide foot so needle
enters center of needle hole. Guide metal of zipper
along edge of foot (Fig. 51). Stitching should be
close to zipper to allow easy opening and closing.
Adjust to sew from either right or left side, which
ever is more convenient.