32 attachment foot, The edgestitcher – SINGER W1762 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
32
ATTACHMENT FOOT
In order to attach the binder, edgestitcher and the
hemmers, it is necessary to remove the presser foot and
replace it with the attachment foot, Fig. 41.
,
Mount binder, edgestitcher or hemmers sliding the
>
attachment to the left as far as possible and tighten
^ screw.
■
The mounting slot enables you to sew as close to or
Z
as far away from the edge as desired. Just move the
’
attachment to the correct position before tightening the
; mounting screw.
Fig. 41
THE EDGESTITCHER
.
The edgestitcher is used in making
lace insertions, edgings and pipings.
The slots serve as guides. To sew lace
edging to fabric, place the material you
want on top in slot. Fig. 42, and other
^
piece in slot 4.
,
. i
Fia 42
Fig. 43
To trim with a wide piping, place
i
„
a
r
r
o
w
momg place
the fabric m slot 4, and the fold of the p.pmg, to the left ш alot 3, For a narrow prpma, p
the fabric in siol 2 and the folded edge of the piping to the right ш slot 3.
Slot 5 may be used as a guide in stitching a french seam.