SINGER W1762 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Trouble
Probable Cause
Correction
Skipping
stitches
Irregular
stitches
Uneven
stitches
Bent needle
Needle placed incorrectly
in clamp
Too fine a needle for thread
being used
Upper thread tension too
loose
Improper threading
Bobbin not wound even
Pulling or holding material
Not enough tension on
upper thread
Poor quality thread
Needle too fine for thread
being used
Discard and replace.
See instruction page No. 6.
See needle and thread chart, page No. 5.
Tighten upper tension.
See threading instruction, page No. 9.
Rewind bobbin.
Avoid pulling or holding material, just guide it.
Increase tension.
Try different thread.
See needle and thread chart, page No. 5.