Raising the bobbin thread – SINGER 9113 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image


Once the needle has been threaded and the bobbin placed in the bobbin case, the bobbin
thread must be brought up through the hole in the needle plate.

1. Hold needle thread with left hand.

• Turn hand wheel slowly toward you,

lowering needle into hole in plate.

2. Continue to do this until needle rises

above needle plate.

• Pull gently on needle thread and bring

up bobbin thread in a loop.

3. Open loop with fingers to find end of

bobbin thread.

4. Draw needle thread through left side

opening in presser foot.

• Pull both threads to back of machine.

This manual is related to the following products: