Keeping seams straight, Turning square corners, Using the seam guide (n) – SINGER 9113 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
KEEPING SEAMS STRAIGHT
To keep seams straight, use one of the
guidelines on the needle plate. The most
commonly used line (1) is extended onto
the slide plate. The crosslines (2) serve as
guides when stitching square corners.
TURNING SQUARE CORNERS
To turn a square corner, use crosslines on
• Line up fabric with extended guidelines
on needle plate and stitch seam, slowing
speed as you approach corner.
• When bottom of fabric reaches corner
ing crosslines (2) on slide plate, stop
• Be sure needle is down in fabric.
• Raise presser foot slightly. Turn fabric,
bringing bottom edge in line with guide
• Continue stitching seam.
USING THE SEAM GUIDE (N)
(Not included with 10 pattern sewing
machine. See page. 35)
For extra help in keeping seams straight,
particularly for very narrow or very wide
seams, use the seam guide which comes
with your machine.
To attach the seam guide, place screw of
seam guide into the hole in the bed of the
machine, on the right side of slide plate (1).
Line up the straight edge of the guide with
the needle plate guideline for desired
seam width and tighten screw.