Cleaning the machine, Threading the machine, Before storing your machine – SINGER 9113 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CLEANING THE MACHINE
Your machine is designed to give you many years of dependable service. To ensure this
reliability, take a few minutes to keep the machine clean. How often you clean it depends on
how often you use it.
Using the lint brush, remove lint or dust
-bobbin case (if there is a lot of lint in this
-machine surface (if necessary, dampen
a soft cloth and use a mild soap to clean
Remove needle plate as instructed and
clean exposed area with a lint brush.
BEFORE STORING YOUR MACHINE
To disconnect, turn all controls to off (“0”)position, then remove
plug from outlet.
• Unplug foot controller from machine.
• Lower presser foot lifter.
• Turn handwheel to lower needle bar to the lowest position.
• Place your machine out of reach of children in safe, dry location.