SINGER 9113 - Manual (Page 5)

Principal Parts
1. Hand Wheel provides a means for
raising or lowering the needle.
2. Bobbin Winder lets you fill the bobbin
with thread quickly and easily.
3. Pattern Display Pane! shows a vari­
ety of patterns available for your
sewing needs.
4. Friction-Free Spool Pin and Cap
hold the top thread supply and allow
it to unwind smoothly as the spool
does not turn.
5. Stitch Width Lever controls the width
of patterns and sets the needle for
straight stitching.
6. Snap-In Thread Guide helps to insure
a smooth flow of thread from the
spool to the tension.
7. Bobbin Winder Tension Disc pro­
vides thread tension for bobbin
winding.
8. Auto Needle Thread Tension Lever
controls top thread tension.
9. Face Plate is a removable cover
protecting movable parts and sewing
light.
10. Sewing
area.
Light illuminates sewing
11. One-Way Needle Clamp holds
needle in machine and prevents
incorrect insertion.
14. Presser Foot Lifter, at the back of
machine, lets you raise and lower
presser foot.
15. Thread Cutter is built into face plate
cover for convenience and safety.
16. Slide Plate opens for easy removal
and replacement of bobbin.
17. Feed System moves fabric under
presser foot.
18. Presser Foot holds fabric against the
feed system and snaps on and off.
19. Bed is the work surface of the
machine.
20. Stitch Length Lever allows for a
variety of stitch lengths.
21. Power and Light Switch turns on
the machine and sewing light at the
same time.
22. Reverse Lever provides either
momentary or continuous reverse
fabric movement.
23. Pattern Selector Dial turns directly
to any of the patterns, plus button­
hole, shown on the pattern display
panel.
24. Stitch Balance Ring adjusts appear­
ance of Special Stitch patterns and
buttonholes.
12. Needle Plate supports the fabric 25. Electrical Power Cord connects
during sewing. machine to your electrical outlet.
13. Removable Extension Table lets you
change the machine bed from flat to
free arm.
26. Speed Controller, designed for safety
and convenience, regulates the elec­
tronic solid state speed control.