2) standard 1-needle, 3-thread overedge stitching, Always remove the left needle – SINGER 14U64A User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2) Standard 1-needle, 3-thread overedge stitching
This machine can do I -needle. 3-thread overedge stitching by using only the right needle.
Always remove the left needle
♦ Correct thread tension
Be sure the threads are correctly threaded otherwise
proper thread tension cannot be ohtzined (See page 6).
Set each of the thread tension dials to the settings shown
below and test sew.
Right looper thread
Thread tension Right needle Right looper
Needle thread Right looper Left iooper
, thread tension thread tension
\ dial (orange)
With following figure as reference, adjust the thread tension dials to obtain correct tension.
When right looper thread hes
on the underside of fabric.
When left looper thread
appears on the top.
When needle thread tension is
Right looper-'T?-^^^ ^ ,
thread Left looper
Right looper /
Topside ^ Underside
t t ^
Turn right looper dial (orange)
toward the (+) mark.
Or, turn left iooper dial
(yellow) toward the
Turn left looper dial (yellow)
toward the (-^) mark.
Or, turn right looper dial
(orange) toward the (—) mark-
Turn needle thread tension
dial (green) toward the (+)