Vcristicn stitch, Ornamental 3 thread stitching, Variation stitch – SINGER 14U64A User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
w «
For ornamental and blind (overedge) stitching, use of the edge
guide attachment is very convenient.
Attach edge guide as shown in figure.
12
. Vcristicn stitch
• Ornamental 3 thread stitching
Ornamental stitching can be used for various applications.
Preparation
• Use ordinary overedge throat plate.
. Remove left needle.
• The right iooper thread forms the decorative stitch, therefore fine and unobtrusive threads should be
used for the needle and left Iooper.
Example: Right Iooper thread ..................Wooly nylon
Left Iooper thread ........................extra fine
Needle thread ...............................extra fine
Stitch length................................. 2—3
I. Set thread tensions to normal sewing condition for 1 needle, 3 thread overedge stitch and make a test
sample. (See page 11).
. When making above adjustment, the right Iooper thread tension should be adjusted as light as
possible.
♦ Make a test sample with two ply fabric.
(+) mark so that the right Iooper thread will come
as close as possible to the needle thread as shown in
the sketch.
3. Turn needle thread tension dial (green) toward (-)
mzik so that right Iooper thread, left Iooper thread
and needle thread will all come to the edge of fabric
as shown in the sketch.
Underside
16