Thread blindstitching, Braiding by chainingoff, Braiding by chaining-off – SINGER 14U64A User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

3-Thread blindstitching

Blindstitching provides a durable hem finish that is almost invisible* It is best suited for sewing cuffs on

knitwear and skirt hems.


Remove left needle


Throat plate

Thread tensions

Stitch length dial

Knit fabric

Ordinary overedge throat plate

Set tensions to normal sewing condition for 1 needle, 3 thread overedge stitching
(see page 11),

Set stitch length dial to 4-5.

With the underside up, place the threefold fabric under the foot with the soft fold resting against the wall
of edge guide as shown in the sketch. Lower the foot, and make a test sample to see that the needle will

pierce the edge of the fold. Adjust position of edge guide if necessary.

♦ Braiding by chainingoff

Chained-off braids can be used for making 3 ply or 4 ply braids.

To make chained-off braids, place movable knife in the non-operating position. Insert filler cord such as
woollen yam or tape through hole in foot and chain-off*


This manual is related to the following products: