SINGER 14U64A User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

4. Open iooper cover.

5. Turn hand wheel toward you to bring movable knife to its lowest position and place it in the non­

operating position as shown in sketch below.



Push the movable knife holder to the
right as far as it mil go and turn the knob
in the directiorx shown.

As shown above, the movable knife
will be in a non-operating position.

6. Attach edge guide to machine.

7. Fold fabric m half with the wrong side facing.

8. Place fabric under the foot with the fold resting against the wall of edge guide. Adjust edge guide so

that it is positioned in the center of the seam width as shown in the sketch.

9- When stitching is completed, unfold fabric and press the stitching from the underside of the fabric.


This manual is related to the following products: