SINGER 6110 - Manual (Page 31)

/\ ^ ^ ^ y'\ ^ ^
/ \ •'v V'S ./^ 'V ^ S , / ' . /
/ ^У \ / ^ if v> 'v / '. /
V V V V V V V V V V
/S /S A ^ /V .A
/ V / V ^ \ ^ \ ^ S
/ S ^ \ ^ \ * \ / V / \
/ V / V S / v ' V ^
/ MULTI-STITCH ZIG-ZAG \
/ The mufti-stitch zig-zag is an extremely versatile stitch. Use it to mend, join or re-
inforco without bulk. With this stitch you may attach elastic and stretch lace, con-
,> struct lingerie and swimsuits and finish seams. There are many other useful
< applications for the multi-stitch zig-zag.
> T
S A A /
V V V
■v fi \ fi \ fi \ / s fi \ / V fi \ fi \ fi \ fi
\ fi \ / \ fi K fi \ fi S fi S fi N / \ fi \ fi S fi S fi
\fi V V V V V V V V V
w
............ _ , , m
Bar Tacks
Pattern Group Selector: 3
• Needle Position: j* \X
• Stitch Width: i
• Stitch Length: 0
• General Purpose Needle Plate
• General Purpose Foot
i
t
Ì i
Beit Loops on
Finished Garment
Make a test sample, using scraps of your ma­
terial, and duplicating all garment thickness.
1. Mark position for the finished end of belt
loop on the fabric.
• Place belt loop, wrong side up, straight
stitch with cut end 3 mm (1/8 inch) from
edge of garment; do not stitch beyond
edges of the belt loop. Trim the end close
to the stitching and press.
2. Fold belt loop back on the stitching line and
press.
• Set your machine according to the code
above.
• Stitch 3 mm (1/8 inch) from the fold using
the multi-stitch zig-zag stitch.
3. Fold over second part and bar tack.
Mending a Tear
• Trim ragged edges.
• Place* underlay on the wrong side of tear
for reinforcement. (Do not baste or pin the
underlay, since you will be bringing the
edges together in the next step).
• Stitch on the right side, bringing the edges
of the tear together. Shorten stitch length at
ends and corners to give extra strength.
• Trim underlay.
М0