SINGER 6110 - Manual (Page 33)

buttonholes
• Pattern Group Selector: /
• Stitch Balance Dial: Neutral position
• Buttonhole Foot
Always make a test buttonhole on a sample in
your fabric. Be sure to duplicate thickness of
garment and include interfacing.
If the two lines of stitching in your sample are
of unequal density refer ’to the next page.
Place work under buttonhole foot, align centre
marking of buttonhole A with red line on foot,
and align end marking of buttonhole B with
horizontal line on foot. Do not lower the needle,
B
FOUR-STEP BUTTONHOLING
Step 1; Bar Tack
Turn buttonhole dial clockwise to step
1, Position needle in fabric at point A.
Lower the foot and stitch the first bar
tack taking at least four stitches end­
ing at point B.
Step 2: Side Stitching
Raise needle above fabric by turning
hand wheel toward yoth
Turn buttonhole dial clockwise to step
2. Stitch to the end of buttonhole at
point C.
32